DENSITY 30 to 60 Kg/m³ normally for pipe and duct insulation.
1- Density 80 to 220 Kg/m³ for thermal support or any other special application *Can be produced upon customer’s request
*The values given against the above properties are typical and are not meant to imply specification limit and should not be used for this purpose without reference to SAPTEX.
GENERAL :
SAPTEX manufactures, rigid polyurethane foam in a wide range of densities for different applications.
APPLICATION :
SAPTEX polyurethane foam is used in many different applications i.e. hot & cold wa-ter pipes, heating & air-conditioning ducts and industrial process pipework. PUR foam meets the requirements of national, regional and international standard/ specifica-tions. If higher performance level is required, Saptex can supply foam meeting most stringent properties. Where higher service temperatures and/or better fire perfor-mance is required, we recommend to use SAPTEX PIR pipe and duct insulation. SAPTEX PIR is a polyisocyanurate foam, which fulfils the highest fire ratings of rigid cellular foams.
AVAILABILITY:
SLABS
PIPE SECTION
PIPE FITTINGS including elbows, tees, valve covers, etc.
BEVELLED SEGMENTS for Vessels, Tanks etc.
DENSITY:
30 kg/m³, 40 kg/m³, 50 kg/m³ and 60 kg/m³ normally for pipe, fittings and slabs.
80 kg/m³, 100 kg/m³, 120 kg/m³ and above for thermal supports, or any other special application.
SIZES: Pipe sections and fittings of any outer diameter, with length 1000 mm. Pipe sizes over 100 mm are made from segments.
Slabs 1200 x 1000 mm, 1200 mm x 2000 mm or requested sizes.
Polyurethane foam is vermin and rodent proof and inert to most chemicals.
English 
العربية
Reviews
There are no reviews yet.